'Lader' handles combine faux leather with brass. They are best suited for furniture pieces rather than bathroom or kitchen cabinetry.
Matching knobs are also available (click 'Knob' above the 'Add to Cart' button and the product page will refresh with more details about the knobs).
Features:
- Available in black (knobs are available in black or brown).
- Available in either 96mm or 128mm sizes.
- The brass knobs can be used on their own if desired - they would work as very small knobs.
- Made from faux leather (not real leather).
- Each unit is packed in a polybag with the brass knobs separate.
- 25mm and 30mm M4 screws are included so as to provide greater flexibility when fitting.
Specifications & Dimensions:
Material: Faux leather & brass.
Finish: Black.
Length: Varies depending on the size chosen.
CC: Varies depending on the size chosen (CC = the distance between the center of each fixing hole).
Width: 25mm.
Projection: 30mm when installed, 10mm when uninstalled and laid flat (also commonly referred to as depth).
Fastener(s) Required: 2 x M4 machine screws per handle (25mm and 30mm are included by default).
Sizes Available:
Note the Following: CC (center to center) = distance between the center of each hole. Length = the total length of the handle from one end to the other.
- CC = 96mm, Length = 136mm
- CC = 128mm, Length = 168mm
Important Information:
The handles are designed to be used at either 96mm cc or 128mm cc (center to center - these are standard sizes). However, due to faux leather being flexible, there is more flexibility with installation. For example, you could use a 96mm cc handle at 90mm cc - this would result in the handle having greater projection, but would still be useable.
These handles are affixed using M4 machine screws with standard 4mm fixing holes. However, you could drill M6 (6mm) holes to allow the stem of the brass knobs to sit within the base material (e.g. wood drawer panel). In this manner the leather part would then be sitting flush against the base material, instead of a few millimeters away. However, it is recommended to try 4mm screw holes first (you can make a 4mm hole into a 6mm hole, but you can't make a 6mm hole into a 4mm hole).
Note that these handles are made from faux leather. This is not real leather and is instead a synthetic material. It has a similar appearance and texture, but, it will not last as long as real leather. Faux leather was chosen as it is more affordable and vegan friendly.
We recommend that you don't use faux leather in kitchens or bathrooms as it's harder to keep clean compared to regular metal hardware.
The brass knobs are somewhat inlayed into the finished handles (they do project slightly and appear a bit like buttons). These knobs can be used without the leather part and would work as very small knobs. The knobs have a diameter of 18mm and a projection of 10mm.
Warranty:
Structural: 1 year.
Finish: 1 year.